215686
29
Zoom out
Zoom in
Previous page
1/36
Next page
29
3M
Digital Media System 700 Series
© 3M 2007. All Rights Reserved.
ENGLISH
Troubleshooting
Troubleshooting (continued)
Indicator Lamps
ATTENTION • When the interior portion has become overheated, for safety purposes, the power source is
automatically turned off, and the indicator lamps may also be turned off. In such a case, press the “•” (power
OFF) side of the main power switch and wait at least 45 minutes. After the unit has sufficiently cooled down,
please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again.
Lighting and flashing of the power indicator, the lamp indicator, and the temp indicator have the meanings as
described in the table below. Please respond in accordance with the instructions within the table. If the same
indication is displayed after the treatment, or if an indication other than the following is displayed, please contact
your dealer or service company.
What Flashing Indicator Lamps Mean
Power indicator
Lamp
indicator
Temp.
indicator Description
Lighting in orange Turned off Turned off The unit is in a standby state. Please refer to the
"Power ON/OFF" section of this manual.
Flashing in green Turned off Turned off The unit is warming up. Please wait.
Lighting in green Turned off Turned off The unit is in an ON state. Ordinary operations may
be performed.
Flashing in orange Turned off Turned off The unit is cooling down. Please wait.
Blinking in red The unit is cooling down. A certain error has been
detected. Wait until the power indicator has finished
flashing, and then perform the proper response
measure using the item descriptions below as
reference.
Lighting or
blinking in red
Lighting in
red
Turned off The projector lamp has not been properly fixed
(attached), the projector lamp does not light, and/or
there is a possibility that the interior portion has
become heated. Turn the power OFF and wait at least
20 minutes. After the unit has sufficiently cooled
down, please make confirmation of the following
items, and then turn the power ON again. If the
same indication is displayed, please change the lamp.
• Is there blockage of the air passage aperture?
• Is the air filter is dirty?
• Does the peripheral temperature exceed 35˚C?
Lighting or
blinking in red
Blinking in
red
Turned off The lamp cover has not been properly fixed
(attached). Turn the power OFF and wait at least 45
minutes. After the unit has sufficiently cooled down,
please make confirmation of the attachment state of
the lamp and lamp cover, and then turn the power ON
again.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3m dms 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3m dms 700 in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info