430147
17
Zoom out
Zoom in
Previous page
1/33
Next page
Chapter 3 Setting Up Your CT150 Monitor 17
3M Touch Systems Proprietary Information
Clearance and Ventilation
Leave at least two inches of clearance space behind the CT150
monitor for proper ventilation. Units have vent holes at the top and
bottom on the back of the chassis -- ensure these holes are not
blocked during installation. Always maintain adequate ventilation to
protect the display from overheating and to ensure reliable and
continued operation. Refer to the published specifications for the
maximum and minimum operating temperature and humidity
conditions.
Securing and Routing System Cables
You must be sure to secure all cable connections. Shaking and
vibration, especially during shipment, may dislodge components that
are improperly connected.
Be sure to tighten all cable screws.
Route all wiring and cabling away from heat sources and sharp metal
edges to avoid damage. Also, keep the touch screen cable away from
sources of electromagnetic and radio frequency interference.
Installing the Video Card and Video Driver
Before you can connect your touch monitor, make sure your
computer has a video card already installed for the monitor. After
you connect the monitor, you need to install the video software
driver. The video driver is supplied by the video card manufacturer
and may be found on the CD that came with your computer. If you
need information on installing a video card or video driver, refer to
the manual that came with your video card.
Supported Video Display Modes and Refresh Rates
Your video card must support one of the display modes specified in
Table 1. If you select an unsupported video mode, the monitor will
stop working or display an unsatisfactory picture quality.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3m ct 150 micro touch screen at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3m ct 150 micro touch screen in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info