534678

3Dprintingsystems UP Plus Manual

14
Zoom out
Zoom in
Previous page
1/56
Next page
UP Plus
3D Printer User Manual
13.
Open the software, then click “3D Print” and then “
tialis
e”. The printer should align each of its 3 axis
X axis – the platform
Z axis – platform
up &
Y axis –
head moves left and right and then beeps.
14. Before you
can print, you need to set the height b
tween the nozzle and the
15.
Let the printer know you
material. Click “3D Print” / “Maintenance” / “New
Spool”
16.
Load the filament into the extruder head, click
Print” / “Maintenance” /
17. Download the test “
Bunny
first print”
18.
Run the software and then click
you downloaded the
“
19.
Scale the bunny by 50%, click “Scale” and select “0.5”.
20. Click “Place”
this will centre the model
the base of the
print area
21.
Click the “Print” icon
4.
Troubleshooting
3D Printer User Manual
v 2013.6.10
Open the software, then click “3D Print” and then “
Ini-
e”. The printer should align each of its 3 axis
.
forward and backwards,
up &
down,
head moves left and right and then beeps.
C
hapter 3.3.1
can print, you need to set the height b
e-
tween the nozzle and the
platform.
Chapter 3
.3.2 Setting the
Let the printer know you
have added a new spool of
material. Click “3D Print” / “Maintenance” / “New
Chapter 3.3.4 Other Maint
nance Options
Load the filament into the extruder head, click
“3D
Print” / “Maintenance” /
“Extrude”
Bunny
.STL” file located under “My
http://3dprintingsystems.com/s
Run the software and then click
“Open”. Locate where
“
bunny.stl” file and open it.
Chapter 3.2.2 Loading a
Scale the bunny by 50%, click “Scale” and select “0.5”.
Chapter 3.2.4 Model
this will centre the model
or models on
print area
on the software.
Click the “Print” icon
and click “Preferences”
Troubleshooting
hapter 3.3.1
Initialising the
Printer
.3.2 Setting the
plat-
form Height
Chapter 3.3.4 Other Maint
e-
nance Options
– New Spool
http://3dprintingsystems.com/s
upport/
Chapter 3.2.2 Loading a
3D
model
Chapter 3.2.4 Model
Transformations
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3Dprintingsystems UP Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3Dprintingsystems UP Plus in the language / languages: English as an attachment in your email.

The manual is 7,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info