Manual 3Dprintingsystems UP Plus (page 5 of 56) (English)

534678

Zoom out

Zoom in

1/56

UP Plus

3D Printer User Manual

1. I

ntroduction

1.1 How

to use this

This User Manual

is divided into four sections which cover

and Troubleshooting.

Please

according to these

instructions

1.2 Precautions

Please read this section

carefully before using the printer

1.2.1 Safety

The printer can only be

used with

may be damage

d, with a risk of

To avoid burning,

or model deformation, d

or any other

part of the body

printing.

Protective glasses should always be worn when removin

The brown sections of the currently supplied gloves melt at around 200 degrees, therefore please

do not hold the extruder block with the gloves.

There is a slight smell from ABS when it is being extruded. The smell is,

pleasant. Operate in a

well ventilated room

prints. When ABS is burnt is releases toxic fumes.

Do not use ABS plastic or its printed parts near any kind of heat source, flames,

incense, light bulbs, rockets

etc. ABS will catch fire and burn a thick black smoke.

Always have adult supervision when children are present. Please keep all small printed parts away

from young children, choking hazards! There are sever

HOT objects and most parts used in connection with the 3D Printer. Tie back long hair and loose

clothing. Keep fingers away from moving parts.

Tools and parts should

be stored at a suitable height away from sm

Tools should be used in conjunction with safety gloves

3D Printer User Manual

v 2013.6.10

ntroduction

to use this

manual

is divided into four sections which cover

the

Introduction, Overview, Operation,

Please

study this manual carefully before installation,

and

instructions

. Keep this manual handy and refer

to it when necessary.

carefully before using the printer

used with

the power adapters

supplied by this company, or

d, with a risk of

fire.

or model deformation, d

o not touch the model, nozzle, or the platform by hand

part of the body

, while the printer is working or

immediately after it has

Protective glasses should always be worn when removin

g support material, especially PLA.

The brown sections of the currently supplied gloves melt at around 200 degrees, therefore please

do not hold the extruder block with the gloves.

There is a slight smell from ABS when it is being extruded. The smell is,

however, not too u

well ventilated room

but draught free. D

raughts can affect warping of ABS

prints. When ABS is burnt is releases toxic fumes.

Do not use ABS plastic or its printed parts near any kind of heat source, flames,

fireworks, candles,

etc. ABS will catch fire and burn a thick black smoke.

Always have adult supervision when children are present. Please keep all small printed parts away

from young children, choking hazards! There are sever

al safety issues, small tools, sharp tools and

HOT objects and most parts used in connection with the 3D Printer. Tie back long hair and loose

clothing. Keep fingers away from moving parts.

be stored at a suitable height away from sm

all children.

Tools should be used in conjunction with safety gloves

and glasses.

Overview

Introduction, Overview, Operation,

and

use the printer

to it when necessary.

supplied by this company, or

the product

o not touch the model, nozzle, or the platform by hand

immediately after it has

finished

g support material, especially PLA.

The brown sections of the currently supplied gloves melt at around 200 degrees, therefore please

however, not too u

raughts can affect warping of ABS

fireworks, candles,

etc. ABS will catch fire and burn a thick black smoke.

Always have adult supervision when children are present. Please keep all small printed parts away

al safety issues, small tools, sharp tools and

HOT objects and most parts used in connection with the 3D Printer. Tie back long hair and loose

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of 3Dprintingsystems UP Plus in the language / languages: English as an attachment in your email.

The manual is 7,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

3Dprintingsystems UP Plus Manual

Product: