432418
21
Zoom out
Zoom in
Previous page
1/68
Next page
Preparing to Install the Router 21
The equipment room is dust-proof
Adequate temperature and humidity conditions prevail
The operator wears the ESD-preventive wrist strap, ESD-preventive gloves and
ESD-preventive clothes while handling the circuit board.
The dismantled circuit board is placed upward on the ESD preventive
workbench, or put into an ESD preventive bag.
You avoid direct contact with the elements of the circuit board.
Electromagnetic Discharge
To prevent damage by electromagnetic discharge, do the following:
Take effective measures against electrical net interference for the power supply
system.
Separate the working ground of the router from the grounding device of the
power equipment, or thunder proof grounding.
Keep the router away from wireless launchers, radar launchers and other high
frequency and high current equipment.
Lightning Damage
To minimize the risk of lightning damage do the following:
Install a lightning arrester on the input end of a telephone cable, ISDN line or
T1/E1 line.
Ensure that the PGND wire of the chassis is well grounded
Ensure that the neutral point of the socket of AC power supply is well
grounded
Install a lightning arrester at the input end of the power supply
Workbench
Requirements
Whether you install the router in a rack or place it directly on the workbench, it is
necessary to ensure that:
Airflow is not restricted around the router.
The cabinet and workbench are strong enough to support the weight of the
router and other installation accessories.
The cabinet and workbench are well grounded.
Installation Checklist After you verify that the installation conditions comply with these requirements,
open the packing case of the router and check the contents against the your order
contract. Contact your Service representative if you find any discrepancies.
To install your router, you will need:
Tools
Phillips screwdriver
Flat-head screwdriver
ESD-preventive wrist strap and ESD-preventive gloves
Flat-blade screws (used in wall mounting)
Cables
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3com 3c13618 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3com 3c13618 in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info