65005
52
Zoom out
Zoom in
Previous page
1/138
Next page
52 CHAPTER 5: STANDARD FEATURES
enter a * if a pause is required between an access code and a destination
number.
The number that you choose may be limited by your call permissions. To
view your permissions, see NBX NetSet > User Information > Call
Permissions.
From the telephone, you can set call forwarding using feature codes. Use
the NetSet utility to see your call forwarding settings. Your administrator
can also set programmable access buttons for call forwarding. And you
can select Call Forward All directly from the display panel.
Forward to Mail
From the telephone, you can set your 3Com Telephone so that all
incoming calls go directly to your default call coverage point, usually your
voice mailbox. You can change the destination to the Auto Attendant or
receptionist or a different telephone number. This feature is referred to as
FWD MAIL, Forward to Mail, Forward All Calls to Voice Mail, and Forward
All Calls to VM. When Forward to Mail is in effect, your telephone rings
once before forwarding the call to your default call coverage point.
On a 3Com 3102 Business Telephone:
1 Press the (Forward to Mail) button. The indicator light turns on.
2 To turn off Forward to Mail, press the button again. The light turns off.
On a 3Com 1102, 2102, or 2102-IR Business Telephone:
1 Press the FWD MAIL (Forward to Mail) button. The indicator light turns
on.
2 To turn off Forward to Mail, press the button again. The light turns off.
To set your default call forwarding destination, use the NetSet utility. See
“Default”
later in this section.
To prevent the telephone from ringing even once, use the Do Not Disturb
feature (see “Do Not Disturb”
in Chapter 6) or use the Call Forward All
feature (see “Call Forward All”
later in this section).
Call Forward No Answer, Call Forward Busy, and Call Forward All override
this Forward to Mail setting if they are in effect. If you turn off Forward to
Mail and no other call forward options are in effect, unanswered calls still
go to your default call coverage point but after the number of rings
specified in NBX NetSet > User Information > Call Forward Default.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 3com 3105 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 3com 3105 in the language / languages: English as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info