477803
23
Zoom out
Zoom in
Previous page
1/115
Next page
Mounting Mechanical Installation
23
Figure 2.2 Cover Removing
Figure 2.3 Plastic Cover Removing
Figure 2.4 Multiple-Module Assembly
Warning
Never remove the main board or camera electronics from under the lower
cover while installing 2N
®
Helios IP. Do not disconnect the camera flat
cable from the main board. Do not bend and press upon the flat cable
either.
4. In multiple-module assemblies connect the boxes according to
Figure 2.4, placing the basic module to the left and the extending modules to
the right. The interconnecting cable shall be connected later!
5. Install blank modules on the unused side holes as shown in Figure 2.4.
6. If you are installing a roof module, put it on the wall now.
7. Fix 2N
®
Helios IP on the wall with screws as shown in Figure 2.6. Carry the
supply cables (Ethernet, lock, power cables) to the basic module box through
one of the holes.
Warning
Make sure that the mounting surface for the 2N
®
Helios IP door
communicator is perfectly flat. Avoid mechanical overload upon the
bottom part of the cover. An incorrect installation on an uneven surface
may lead to cover deformation and thus incorrect product functions.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 2N Helios IP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 2N Helios IP in the language / languages: English as an attachment in your email.

The manual is 3,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info