212798
10
Zoom out
Zoom in
Previous page
1/143
Next page
Chapter 1 Before Using the Scanner
1-2
Avoid exposing the scanner to rapid changes in temperature. If the room in which the scanner is
installed is cold but rapidly heated, water droplets (condensation) may form inside the scanner.
This may result in a noticeable degradation in scanning quality.
The following conditions are recommended for optimal scanning quality:
Room temperature: 10 °C to 32.5 °C (50 °F to 90.5 °F)
Humidity: 20% to 80% RH
Avoid installing the scanner near equipment that generates a magnetic field (e.g. speakers,
televisions, or radios.)
Power
Connect only to a power outlet of the rated voltage and power supply frequency. (120 V, 60 Hz or
220-240 V, 50/60 Hz depending on your region)
Do not use a power supply that is not rated for the specified voltage. Doing so might cause a fire or
electric shock.
Do not connect other electrical equipment to the same power outlet to which the scanner is
connected. Also, when using an extension cord, make sure that the extension cord is rated for the
current requirements of the scanner.
The power cord may become damaged if it is often stepped on or if heavy objects are placed on it.
Continued use of a damaged power cord can lead to an accident, such as a fire or electrical
shock.
Do not use the power cord while it is coiled.
Do not pull directly on the power cord. When disconnecting the power cord, grasp the plug and
remove it from the outlet.
Keep the area around the power plug clear of objects so that the power cord can be disconnected
easily in an emergency.
If you have any questions regarding the power supply, contact your local authorized Canon dealer
or service representative for further information.
Moving the Scanner
When moving the scanner, always hold it with both hands to avoid dropping it. The scanner weighs
approximately 14.1 lb (6.4 kg).
CAUTION
Make sure to disconnect the interface cable and power cord when moving the scanner. If the
scanner is transported with these items plugged in, the plugs and connectors may be damaged.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for 2-power canon dr4010c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of 2-power canon dr4010c in the language / languages: English as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info